How to Hide Drives in Windows 10 (Guide)

Have you e'er been concerned about people accessing the data on your Windows computer? Yous manus over your computer to someone for a specific reason, and they end upwardly going through your personal data. Almost probably, you've been looking for ways to protect your information. Sure, you can always encrypt your drive for security, but the encryption process takes very long. Moreover, once you enter the password, the drive remains decrypted until the side by side time you lot log on. And you lot wouldn't want to log off your figurer every time you have to step abroad from it, would you lot?

What if I tell y'all there was a meliorate mode to achieve what yous're looking for? Imagine if y'all could hibernate your disk drives from your File Explorer in such a way that their data tin can nonetheless be accessed by you. Yes, it is possible. In fact, at that place are more than a single way to practise this. So, without any farther ado, here are the best ways to hide drives in Windows ten:

Annotation : I'g showing the procedure on my Windows x Creators Edition PC, but the process should work on Windows 8.1, eight, and 7 as well.

Hide Bulldoze Only Nevertheless Access It

It is possible that you lot hibernate a disk drive from the File Explorer, and still be able to admission its data. In fact, this particular method tin can be accomplished using either of the 2 ways – Local Group Policy Editor or Registry Editor. Post-obit are the footstep-past-step instructions on how to hide a disk bulldoze using either of the ways:

• Using Local Group Policy Editor

1. Open up Local Group Policy Editor past typing"gpedit.msc"in the Run command window.

2. Now, navigate to the following directory:
User Configuration/Administrative Templates/Windows Components/File Explorer

3. Here you will see a list of different settings. Double-click the one that says "Hide these specified drives in My Computer".

four. From the window that pops up, modify the configuration to "Enabled".

5. From the aforementioned window, choose whatever pick that you desire from the drib-down carte du jour of "Pick one of the following combinations". I'll be choosing "Restrict D drive only" for demonstration.

half dozen. Click on "OK" to save your changes.

At present, you won't be able to run across the disk drive if you open up your File Explorer.

If y'all still desire to admission your data, you tin can enter the path either in the Run command or in the address bar of your File Explorer and hit Enter. For example, if I desire to view my 'D' drive, I'll open the Run control window and type "d:/".

If you lot want to revert dorsum to your previous settings, alter the configuration in the fourth step to either "Non configured" or "Disabled".

• Using Registry Editor

1. Open Registry Editor by typing "regedit" in the Run control window.

2. Now navigate to the following path:
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Explorer

3. In one case there, right-click on anywhere on the white space of the Correct Pane –> New –> DWORD (32-bit) Value.

four. You'll have to rename it to "NoDrives" without the quotation marks.

five. Now double-click on this registry centraland change the base to "Decimal". In the "Value data" input, enter the value corresponding to the drive's path that yous want to hide from the list below:

A –> one      Yard –> 64      M –> 4096        Southward –> 262144       Y –> 16777216
B –> two      H –> 128    N –> 8192         T –> 524288       Z–> 33554432
C –> 4      I –> 256     O –> 16384       U –> 1048576
D –> viii      J –> 512     P –> 32768        V –> 2097152
E –> 16    M –> 1024   Q –> 65536       W –> 4194304
F –> 32     L –> 2048   R –> 131072      X –> 8388608

If you lot want to hide all your drives, enter 67108863. If you lot want to hibernate multiple drives, just not all, enter the sum of the values corresponding in the table above. For instance, if you were to hide D and Due east drives, you would have to enter 24 (8 + 16). In my case, I'll type '8' as I desire to hide my 'D' drive.

half dozen. At present click on "OK" and and so restart your computer.

To revert dorsum your changes, you can either change the "Value information" to '0' or delete the registry key birthday.

Remove a Bulldoze's Path Name

If you lot're still feeling a little concerned virtually your privacy later on reading the methods to hide your deejay drive, yous can accept a step further. Yous tin can remove the letter allotted to a drive altogether. This style no one can access a bulldoze which, literally, has no path. This method, too, tin can exist implemented using two ways – Disk Management or Command Prompt.

• Using Disk Direction

1. Open disk management by opening the Run command window and typing "diskmgmt.msc".

2. At present y'all'll come across the list of disk drives that are nowadays on your computer. Correct-click on the bulldoze yous want  its path, and select "Alter Drive Letter of the alphabet and Paths…". I'll again exercise it for my 'D' drive for demonstration.

three. From the window that pops upward, select "Remove", then choose "Aye".

Now, you will have a partition with no path allotted. No i will either be able to see it in the File Explorer or access it by any ways.

If you want to revert back your changes, repeat steps 1 and ii, and from the window that pops up, select "Add". You can now assign the same alphabetic character or even a dissimilar i if you desire.

• Using Command Prompt

1. Open the Command Prompt in Administrator style. To exercise this, you lot can press Windows+X, followed past 'A'.
2. In the Control Prompt window, blazon "diskpart" and hitting enter. This should alter your directory to "DISKPART".

3. Now type "list book" and hit Enter. This will show you lot the disk partitions that are nowadays on your system.

4. After this, blazon "select book" followed by the number that is present against the bulldoze that you want to remove the path for. You'll go a confirmation message. In my example, to remove 'D', I'll type "select volume three".

5. After the confirmation message, blazon "remove letter of the alphabet" followed by the letter of the bulldoze. You'll get a confirmation message. In my instance, I'll be typing "remove letter D".

This method will once more leave y'all with an unallotted drive. To revert back, follow steps i through 4, then type "assign letter" followed by the alphabetic character y'all desire to assign to that drive.

SEE Also: How to Disable Ads in Windows 10 File Explorer

Fourth dimension to Hide Your PC's Deejay Bulldoze

Now that you know how to hide your computer'southward drives from others, you lot tin can paw them your reckoner without worrying about them accessing your data. Your data will be subconscious from view, but you'll know how to access it.

Exercise you know of whatever other tricks using which you can hide your disk partitions? Do let me know in the comments section beneath.

Source: https://beebom.com/how-hide-drives-windows-10/

Posted by: hookyousin45.blogspot.com

Share this post